Problem Specification |
We will need to run the steady state model and use the result as the initial condition for the transient analysis.
Right click on Steady-State Thermal (A5) > Insert > Temperature.
Select the entire Shell body and set the temperature to 22 degrees Celsius. Create another temperature boundary condition but select the Specimen instead. Set the temperature of the Specimen to -273.15 degrees Celsius.
Right click on Solution (A6) > Insert > Thermal > Temperature. The default geometry is set to All Bodies. Keep it and repeat the step but select only the Specimen.
Go to Step 5 - Solution
Go to all ANSYS Learning Modules