, in the workbench window. Next, right click on the Solution (A6) folder, then click insert, then click Beam Tool and finally click Beam Tool as shown in the image below.
First, click on the solution button, , in the workbench window. Next, right click on the Solution (A6) folder, then click insert, then click Beam Tool and finally click Beam Tool as shown in the image below.
https://confluence.cornell.edu/download/attachments/125812728/InsertBeamTool_Full.png |
Then, right click on the Beam Tool folder that you have just added, then click on Insert, then click on Beam Tool > Deformation > Total as displayed below.
https://confluence.cornell.edu/download/attachments/125812728/InsertTotalDeformation_full.png |
Next, right click on the Beam Tool folder, then click on Insert, then click on Beam Tool > Stress > Maximum Bending Stress as shown below.
https://confluence.cornell.edu/download/attachments/125812728/InsertMaxBendStress_full.png |
Now, we will set up a solution for the bending moment along the beam.
In order to solve click on the solve button, 
, which is located near the top of the Setup window. This process may take some time depending on the quality of the computer you are working with, so please be patient.
Go to Step 6: Results
See and rate the complete Learning Module
Go to all ANSYS Learning Modules