2. Geometry

Attach Geometry from Cantilever to Cantilever Modal

The geometry for the "Cantilever Beam Modal Analysis" tutorial is the same as the geometry for the "Cantilever Beam" tutorial. Instead of recreating the geometry, we will simple attach the geometry from the Static Structural Analysis System (Cantilever) to the Modal Analysis System (Cantilever Modal). In order to attach the geometry, left click geometry in Cantilever and drag it to geometry in Cantilever Modal, as shown below.

https://confluence.cornell.edu/download/attachments/145756992/ShareGeometry_Full.png

Then release the left mouse button. You should now see that the geometries are shared as shown in the following image.

https://confluence.cornell.edu/download/attachments/145756992/SharedGeometry_Full.png

Go to Step 3: Mesh

See and rate the complete Learning Module

Go to all ANSYS Learning Modules