The laminate plate is made out of four layers as can be seen in the following illustration.
Note that the orientations are either 0 or 90 degrees.
This tutorial guides the user to complete VM 82 from the Verification Manual for The Mechanical APDL Application using shell elements in ANSYS Workbench. Consider a square cross ply laminate plate that is supported at its edges and subjected to a uniform pressure as shown in the image below.
The laminate plate is made out of four layers as can be seen in the following illustration.
Note that the orientations are either 0 or 90 degrees.
The length of the sides of the square are 10 meters, the thickness of each layer is 0.025m and the total thickness of the plate is 0.1m.
Go to Step 1: Pre-Analysis & Start-Up
See and rate the complete Learning Module
Go to all ANSYS Learning Modules