The radius of the hole needs to be declared a design variable. In order to do so first, open the Design Modelerfrom the Project Schematic window. Then expand XYPlane. Next, highlight Sketch1. Now, check the box to the right of "R3", which will be in the "Dimensions: 3" part of the "Details View" table. When you check the box an uppercase "D" will appear within the box and you will be asked what to call the parameter. Call the parameter "DS_R". The Design Modeler can now be closed.
This particular optimization problem has two output parameters: the maximum Von Mises stress and the volume of the quarter plate. In order to specify the two output parameters, first open the
Go to Step 4: Design of Experiments
See and rate the complete Learning Module
Go to all ANSYS Learning Modules