Plate With a Hole Tutorial - Pre-Analysis and Start-Up

Pre-Analysis Calculations

Click here to view the Pre-Calculations pertaining to this geometry: Pre-Analysis

ANSYS Simulation

Now, let's load the problem into ANSYS and see how a computer simulation will compare. First, start by downloading the file here

The zip should contain a class demo1 folder with the following contents:

• Plate With a Hole Solution folder
• Plate With a Hole.wbpj
  Please make sure both these are in the folder, the program would not work otherwise. (Note: The solution was created using ANSYS workbench 12.1 release, there may be compatibility issues when attempting to open with other versions). Be sure to extract before use.

2. Double click "Plate With a Hole.wbpj" - This should automatically open ANSYS workbench (you have to twiddle your thumbs a bit before it opens up). You will be presented with the ANSYS solution.

A tick mark against each step indicates that that step has been completed.

3. To look at the results, double click on "Results" - This should bring up a new window (again you have to twiddle your thumbs a bit before it opens up).

4. On the left-hand side there should be an "Outline" toolbar. Look for "Solution (A6)".

 We'll investigate the items listed under Solution in the next step in this tutorial.

Continue to Step 2 - Results
See and rate the complete Learning Module
Go to all ANSYS Learning Modules