. If you have used only two elements you should see the output shown below.
If you have chosen to use 10 elements for your mesh you should see the following output for the total deformation.
First, examine the total deformation by clicking on the Total Deformation button, . If you have used only two elements you should see the output shown below.
If you have chosen to use 10 elements for your mesh you should see the following output for the total deformation.
The beam deformation can be animated by clicking on the play button, 
, which is located underneath the beam deformation results.
Go to Step 7: Verification & Validation
See and rate the complete Learning Module
Go to all ANSYS Learning Modules