You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 15 Next »

Problem Specification

Determine the force in each member of the following truss. Indicate if the member is in tension or compression. The cross-sectional area of each member is 0.01 m, the Young's modulus is 200x109 N/m2 and Poisson ratio is 0.3.

The solution in ANSYS for this and subsequent tutorials is divided into the nine steps listed above. Note that you'll need to follow these same nine steps for solving almost any problem in ANSYS or a comparable finite-element analysis package.

Go to Step 1: Start-up and preliminary set-up

See and rate the complete Learning Module

Go to all ANSYS Learning Modules

  • No labels