You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 22 Next »

Problem Specification

Consider the square plate of uniform thickness with a circular hole with dimensions shown in the figure below. The thickness of the plate is 1 mm. The Young's modulus E =107 MPa and the Poisson ratio is 0.3. A uniform pressure p=1 MPa acts on the boundary of the hole. Assume that plane stress conditions prevail. The stress and displacement fields are to be determined using ANSYS. This problem is taken from section 6.14, p. 240-244 of Cook et al


 
Go to Step 1: Start-up and preliminary set-up

  • No labels