You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Current »

Unable to render {include} The included page could not be found.

Bladed: Assigning Airfoils to Blade Sections

Click ‘Load’ in the aerofoil screen below:



This shows all of the aerofoils available:



That’s a total of 13 aerofoil sections available (although 3 of these appear to be just cylinders). The simplest way to use them is to go to ‘define’ at any blade station that you wish to change:



Then click ‘New’:







Double click in the blank white rectangle:



Select an aerofoil section:



Click OK:



Click OK again.



You can see that that blade station has now been changed to the newly defined blade section number 5.


Acknowledgement: Instructions courtesy of Mr. Alec Beardsell, GL Garrad Hassan.

  • No labels