You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

Unable to render {include} The included page could not be found.

Author: John Singleton and Rajesh Bhaskaran

Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises

2. Pre-Analysis & Start-Up

Please complete the "Steady Flow past a Cylinder tutorial before completing this tutorial. Click here to go to the problem statement of the "Steady Flow Past a Cylinder" tutorial.

Alternatively, click here to download the completed project files for the "Steady Flow Past a Cylinder" tutorial.

The pre-analysis is the same for both steady and unsteady flow past a cylinder. Click here to go to the pre-analysis of the "Steady Flow Past a Cylinder" tutorial.

To start-up, open your completed "Steady Flow Past a Cylinder" project file. (If using the completed version in the zip file above, extract the files and open "Cylinder.wbpj".)

Right-click on Fluid Flow (FLUENT) and then click Duplicate. Enter "Unsteady Flow" in the highlighted field to rename it. Your Project Schematic should now appear as below.



Go to Step 2: Geometry

See and rate the complete Learning Module

Go to all FLUENT Learning Modules

  • No labels