You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.

T-Beam: Geometry

We will first create a sketch and then extrude it to make our beam. We will then split our beam in 3 sections in order to create lines to apply our loads on. The video below shows the steps to be followed to create the sketch, the beam and to slice the body in three sections. 

Continue to Step 3 - Mesh
Go to all ANSYS Learning Modules

  • No labels