You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.

Planar Approximations for a Two-Dimensional Beam Analysis

A simply-supported beam of rectangular cross-section is point loaded at some arbitrary point along its length as shown in figure below.



P = 10,000 lb, L = 100 in, a = 75 in, b = 3 in, h = 8 in
The material is structural steel with Young's modulus E= 2.9e7 psi. Assume that plane stress condition is valid.

Find the non-dimensionalized maximum deflection defined as:

Under construction

Continue to Step 1 - Pre-Analysis and Start-Up

Go to all ANSYS Learning Modules

  • No labels