Unable to render {include} The included page could not be found.
Author: Samuel H. Smith, Cornell University
3D Conduction: Tips and Tricks
2. Geometry
If Importing a Geometry from a CAD Package:
- Divide the geometry into various components; this will be called an "assembly" in a standard CAD package.
- Use the STEP format (.stp). This is the most stable format.
- After opening the model in ANSYS Mechanical, you will see a "Connections" folder in the tree. Make sure that the contact regions are all set to "bonded."
This is the default contact.
3. Mesh
4. Setup (Physics)
7. Verification and Validation
See and rate the complete Learning Module
Go to all ANSYS Learning Modules