You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

Author: Ben Mullen, Cornell University

Problem Specification
[1. Pre-Analysis & Start-Up]
[2. Geometry]
[3. Mesh]
[4. Setup (Physics)]
[5. Solution]
[6. Results]
[7. Verification & Validation]

Problem Specification

A steel bar (E = 2.0E10 Pa, v = 0.3

Unknown macro: {latex}

$\alpha$

= 1.2E-5) with the dimensions shown below placed between two walls. On one side, the bar is rigidly fixed to the wall and on the other, there is a 2 mm gap between the wall and the bar. What is the stress in the bar after the temperature increases

Unknown macro: {latex}

$ 100^

Unknown macro: {circ}

C $

Go to [Step 2 - Pre-Analysis & Start-Up]

  • No labels