Sign-up for free online course on ANSYS simulations!Author: Ben Mullen, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation
Problem Specification
A steel bar (E = 2.0E10 Pa, v = 0.3) with the dimensions shown below placed between two walls. On one side, the bar is rigidly fixed to the wall and on the other, there is a .02 mm gap between the wall and the bar. What is the stress in the bar after the temperature i