Error formatting macro: include: java.lang.IllegalArgumentException: No link could be created for 'SIMULATION:ANSYS 12 - Cantilever Beam - Panel'.
Problem Description
Consider the beam in the figure below. It is clamped on the left side and has a point force of 8kN acting downward on the right end of the beam. The beam has a length of 4 meters, width of 0.346 meters and height of 0.346 meters. Additionally, the beam is composed of a special material called Cornellian which has a Young's Modulus of
Unknown macro: {math}
2.8x10^10
Pa and a Poisson ratio of 0.4 .
[*Go to Step 1: Pre-Analysis & Start-Up*]
[See and rate the complete Learning Module]