You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Unable to render {include} The included page could not be found.

Problem Description

Consider the beam in the figure below.  It is clamped on the left side and has a point force of 8kN acting downward on the right end of the beam.The beam has a length of 4 meters, width of 0.346 meters and height of 0.346 meters. The beam is made out of a special material called Cornellian which has a Young's Modulus of 2.8 x 10^10 Pa and a Poisson ratio of 0.4 .

Go to Step 1: Pre-Analysis & Start-Up

See and rate the complete Learning Module

Go to all ANSYS Learning Modules

  • No labels