cloak.toggle.type = none
DO NOT EDIT THE MASTER TEMPLATE. IF THE FILENAME ABOVE SAYS "SYSTEM - Modulename Problem Specification", THEN YOU SHOULD CANCEL NOW.
Before you use this template, edit the filename above to be as follows:
SYSTEM: the software system this learning module is designed for.
Modulename: the name of the process this module will demonstrate.
Problem Specification
1. Pre-analysis
2. Create geometry
3. Specify input parameters
4. Mesh geometry
5. Specify boundary conditions
6. Solve and post-process results
7. Refine mesh
8. Verify and validate results
In this step, you should do the following:
* introduce the concept that you will be demonstrating
* describe, in broad terms, the concepts to be used
* present questions that the learning module will show how to answer
* provide a quick overview of the steps to be taken