Numerical Results

Now, we will look at the results of the simulation.

Temperature

In the Outline window, click the temperature solution we created . you should see the following

The temperature is 122 degrees Celsius throughout, which is to be expected.

Total Deformation

In the Outline window, click the deformation solution we created . you should see the following

The maximum deformation is .002 m, which matches our boundary condition.

Normal Stress

In the Outline window, expand the beam tool folder, and click on Direct Stress. You should see the following

The stress is constant throughout.

Go to Step 7: Verification & Validation

Go to all ANSYS Learning Modules