...
- Ensure you are not running Cadence anywhere (i.e. research server, linuxpool, amdpool, etc.)
- To find your cadence processes run the command
Code Block ps
\-elf
\|
grep
cadence
\|
grep
<login
id>
For example:code
ps
\-elf
\|
grep
cadence
\|
grep
yyy33
You can omit the "| grep cadence" just to see all your processes. - You can kill all your processes, including your login shell, by typing
kill -9 -1
- Check your processes again per step 2 until you are sure your cadence processes are gone.
- You may need to clean up Cadence lock files. You can run the command:
find . -name .snapshot -prune -o -name
cdslck
-exec rm {} \;
...
Various security updates affect NFS periodically. You need to set the environment variable DD_DONT_DO_OS_LOCKS before starting cadence.
Example:
Code Blocknoformat |
---|
prompt> setenv DD_DONT_DO_OS_LOCKS TRUE prompt> icfb |
Spectre Memory Errror
Spectre gives you Out of Memory Errors
Code Blocknoformat |
---|
Warning from spectre during PNoise analysis `pnoise'. WARNING (SPCRTRF-15142): The 'maxsidebands' parameter in analysis `pnoise' has the unusually small value of 5.Using too small a value degrades accuracy because this parameter controls the amount of noise folding considered. |
Using the operating-point information generated by PSS analysis `pss', you get:
Code Blocknoformat |
---|
Mem Used: 579124 kB (Memory Exhausted) |
...
You have to set the application install directory environment variables for the tools you want to use. Below is an example for all of them:
Code Blocknoformat |
---|
\# # Path to application install directories # set CDSHOME = /opt/cadence/ic set ASSURAHOME = /opt/cadence/assura set ANLSHOME = /opt/cadence/anls set ASSURAHOME = /opt/cadence/assura set CONFRMLHOME = /opt/cadence/confrml set EMGRHOME = /opt/cadence/emgr set ETHOME = /opt/cadence/et set ETSHOME = /opt/cadence/ets set EXTHOME = /opt/cadence/ext set ICHOME = /opt/cadence/ic set IFVHOME = /opt/cadence/ifv set IUSHOME = /opt/cadence/ius set MMSIMHOME = /opt/cadence/mmsim set PACIFICHOME = /opt/cadence/pacific set RCHOME = /opt/cadence/rc set SOCHOME = /opt/cadence/soc set SPBHOME = /opt/cadence/spb set CTOSHOME = /opt/cadence/ctos |
Then you set paths to the executables for each of the apps, for example:
Code Blocknoformat |
---|
\# # Path to Cadence Executables # set dfiiPath = ($CDSHOME/tools/bin $CDSHOME/tools/dfII/bin) set assuraPath = ($ASSURAHOME/tools/bin $ASSURAHOME/tools/dfII/bin) set anlsPath = ( $ANLSHOME/tools/bin $ANLSHOME/tools/dfII/bin ) set confrmlPath = ( $CONFRMLHOME/tools/bin $CONFRMLHOME/tools/dfII/bin) set emgrPath = ( $EMGRHOME/tools/bin $EMGRHOME/tools/dfII/bin) set etPath = ( $ETHOME/tools/bin $ETHOME/tools/dfII/bin ) set etsPath = ( $ETSHOME/tools/bin $ETSHOME/tools/dfII/bin ) set extPath = ( $EXTHOME/tools/bin $EXTHOME/tools/dfII/bin ) set ifvPath = ( $IFVHOME/tools/bin $IFVHOME/tools/dfII/bin ) set iusPath = ( $IUSHOME/tools/bin $IUSHOME/tools/dfII/bin ) set mmsimPath = ( $MMSIMHOME/tools/bin $MMSIMHOME/tools/dfII/bin ) set pacificPath = ( $PACIFICHOME/tools/bin $PACIFICHOME/tools/dfII/bin ) set rcPath = ( $RCHOME/tools/bin $RCHOME/tools/dfII/bin ) set socPath = ( $SOCHOME/tools/bin $SOCHOME/tools/dfII/bin ) set spbPath = ( $SPBHOME/tools/bin SPBHOME/tools/dfII/bin ) set ctosPath = ( $CTOSHOME/tools/bin $CTOSHOME/tools/dfII/bin ) |
Then you have to update your actual UNIX path:
Code Blocknoformat |
---|
\# # Set Path # set path = ( $PATH \ $dfiiPath \ $assuraPath \ $anlsPath\ $confrmlPath\ $emgrPath\ $etPath\ $etsPath\ $extPath\ $iusPath\ $ifvPath\ $iusPath\ $mmsimPath\ $pacificPath\ $rcPath\ $socPath\ $spbPath \ $ctosPath ) |
Add an entry to point to the licensing information:
Code Blocknoformat |
---|
\# # Generic License File Setting # #setenv LM_LICENSE_FILE 5280@flexa.ece.cornell.edu,5280@flexa.ece.cornell.edu,5280@flexa.ece.cornell.edu:$LM_LICENSE_FIE # # Cadence Specific License File Setting # setenv CDS_LIC_FILE 5280@flexa.ece.cornell.edu,5280@flexb.ece.cornell.edu,5280@flexc.ece.cornell.edu |
Set up the cadence environment variables
Code Blocknoformat |
---|
\# # Cadence Specific Environment Variables # setenv CADENCE_BASE /opt/cadence setenv CDS_INST_DIR ${CADENCE_BASE}/ic setenv CDS_INSTALL_DIR ${CDS_INST_DIR}/tools/dfII setenv CLS_CDSD_COMPATIBILITY_LOCKING NO setenv SPECTRE_DEFAULTS " \-E " setenv CDS_Netlisting_Mode Analog setenv CDS_DEFAULT_BROWSER firefox setenv CDS_AUTO_64BIT ALL # # Other Cadence Environment Varibles # #CDS_LOG_PATH #CDS_LOAD_ENV #CDS_PROMPT_CKOUT #CDS_AUTO_CKOUT #CDS_PROMPT_CKIN #CDS_AUTO_CKIN #CDS_IBM_FULLDUMP #CDS_LOG_VERSION #CDS_SHM_ADDR |