Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migration of unmigrated content due to installation of a new plugin
Include Page
ANSYS Google Analytics
ANSYS Google Analytics
Include Page
Cantilever Beam Modal Analysis - Panel
Cantilever Beam Modal Analysis - Panel

Mesh

Launch Mechanical

(double click) Model, , in the "Cantilever Modal" project.

Generate Default Mesh

First, (click) Mesh in the tree outline. Next, (click) Mesh > Generate Mesh as shown below.


Size Mesh

In this section we will size the mesh, such that it has ten uniform elements. In order to size the mesh, first expand Sizing located within the
Details of "Mesh" table. Next, set Element Size to 0.40 m, as shown below.



Now, (click) Mesh > Generate Mesh in order to generate the new mesh. You should obtain the mesh, that is shown in the following image.


newwindow
Click Here for Higher Resolution
Click Here for Higher Resolution
https://confluence.cornell.edu/download/attachments/145756994/10ElemMesh_Full.png


Note that in this simulation we are working with beam elements, which are simply line segments. As a visualization tool ANSYS displays a beam with width and height. In order to display the actual mesh (click) View > (deselect) Thick Shells and Beams. You will then see the mesh displayed in its native form.


newwindow
Click Here for Higher Resolution
Click Here for Higher Resolution
https://confluence.cornell.edu/download/attachments/145756994/LineMesh_Full.png


Save


Go to Step 4: Physics Setup

Go to all ANSYS Learning Modules