Page History

...

The "Filmed With" guidelines in this procedure cover item record creation and barcode linking only, and are aimed primarily at staff who barcode microfilm containers as part of the post-cataloging or collection management process.

Contact: Barb Tarbox   Pedro Arroyo

Unit: Database Quality

Date last reviewed: 12/20/2017 September 2020

Date of next review: November 2017 October 2021

...

Bound With (Print Titles)

Filmed With (Microfilm Titles)

Empty item record creation

Item Records Without Barcodes for Bound With and Filmed With at the Annex

...

...

...

a.  Create an item record, if one is not already attached to the proper MFHDholdings screen. Since this single item record will represent the entire physical volume, be sure to record the proper enumeration and chronology for the bound volume (if applicable) in the item record.

b.  Add an 852 $z a note in the Mfhd record Holdings notes section that records either:

• Notes the NEXT title in the volume (cite full author heading and enough of the title to allow for a reasonable search)

• Image Added
• Image Added Ex.: 852 ... $z Bound with: Bingham, John Armor, 1815-1900. Trial of the conspirators, for the assassination of President Lincoln.
  

• Or, notes the position of the title in the volume and the spine title of the volume. In the case of a partially analyzed serial, use the enumeration from the piece itself, when appropriate

• Image Added
• Image Added
• Image Added
• Image Added Ex.: 852 ... $z No. 1 in a vol. lettered: May anti-slavery pamphlets.
  Ex.: 852 ... $z No. 1 in a vol. with binder's title: Collected pamphlets, v. 6.
  Ex.: 852 ... $z No. 16 in a vol. with binder's title: Working papers in Asia studies, no. 16-20.

2.  Identify the subsequent titles in the physical volume. For each title:

a.  Do not create item records. Delete any that are already attached to target Mfhd recordsCreate an "empty" item record (no barcode). See below for more information about what to record or not record in these items.

b.  To the holdings record add:

• An 852 $z A note that either identifies the FIRST item in the volume, using the pattern established in the 852 $z note created for the FIRST title's holdings record, or notes the position of the title in the volume and the spine title of the volume (as in Step 1b;And, an 87X field with a $p [barcode of first title item record]; normally, 876 (for a basic bibliographic unit) would be used, but 877 or 878 should be used if the material is a supplement or index.

• 
  

  Image Added  Ex.: 876 ## $p 31924084331184

3.  If one or more of the subsequent titles in the physical volume are not monographic, single-part materials, additional information may need to be added to the 87X information. For a single serial volume or issue, or a part of a multi-part title bound withother with other unrelated materials, volume or other identifying information should be recorded in with the 87X $3 barcode to indicate which part or parts of the title represented by that holdings record are included in the "bound with" volume. In general, use the same format for the $3 that information that has been used in the holdings for the serial or multi-part holdings string. If necessary, a note pertaining to the physical arrangement can be added to the 87X field as well in a $z

Image Added

Ex.: 876 ## $3 v.3:no.1 (1855:Jan.) $p 31924084331675
Ex.: $3 score + 3 parts $p 31924084331889 $z Each of the 4 physical pieces (score, violin, viola, violoncello) of the Mendelssohn is hard-bound with its equivalent in the Weber. All pieces stored in one box.

...

5.  For retrospective conversion only: If Cornell has cataloged one or more titles ( but has also not cataloged one or more all titles ) that have been bound together subsequent to publication in a single physical volume, select the first cataloged title as your primary title (Note: it may not be the first title in the volume), add a MFHD holdings record to this instance, and to all the other cataloged titles in the volume, with appropriate ‘bound with’ notes and 876sand "Bound with item data" notes. Ignore all the uncataloged titles in the volume. In addition, add the following staff note in the MFHD holdings record for the primary title:

...

Image Added

However, if Cornell has not cataloged any titles that have been bound together subsequent to publication in a single physical volume, create a bib instance and holdings record and MFHD for the first title in the volume. Add the following staff note in the MFHDholdings:

...

Image Added

...

...

Ex.: 852 ... $x Other titles on physical reel will not be cataloged.

...

...

1. If the MFHD has no 86X fields and there is no subfield 3 in the 876 field, create an empty item record, (no barcode), and only place "Bound with" in the enum portion of the empty item record if MFHD is a serial or a book. If the item is in a form of microfilm, microfiche, microcard, or some other form of film type, place "Filmed with" in the enum portion of the empty item record. The item type should be same as the parent 876 field barcode.
2. If the MFHD has a single 866 field with enum and/or chron data, that data has to be transferred over to the enum and/or chron portion of the empty item record accordingly.
   Example: If the 866 field had some form of enumeration, such as v.1 or pt.2, that data would be placed in the enum section behind the note "Bound with: v.1" or "Bound with: pt.2". If there is only chronology data, such as 1999 or 1829, that data would be placed in the chron section of the empty item record. The "Bound with:" note, including the colon, is still placed in the enum section of empty item record. If the 866 field has both enumeration and chronology data, such as Bd.6 (1946), then the enumeration portion is placed behind the note "Bound with:Bd.6" in the enum section and the chronology portion is placed in chron section, without the parentheses.
   NOTE: If the 876 field has a subfield 3 with the same or similar data as the 866 field, use the data in the 876 subfield 3 when creating the empty item record.
3. If the MFHD has an 866 field and a 867/868 field, with data representing a supplement and/or index, that data would be included in the enum or chron section accordingly.
   Example: If there was an 866 field with data such as no.1-2 and a 867 field with 1929, the enumeration data would go behind note "Bound with:no.1-2" and the supplement data would be placed in the chron section as such, "includes supplement 1929". If the 866 field only had chronology data such as 1986 and the 867 had supplement data such as 1986:Dec., the "Bound with:" note is still placed in the enum section of the empty records and the chronology data placed in the chron section of the empty item record in this format: 1986 (includes supplement 1986:Dec.)
4. If the MFHD has multiple 86X fields, please consult Peter DelaCuadra prior to creating the empty item record, as the array of data may not fit within the parameters of the spacing in the enum/chron section of the empty item record.

1. After the 876 fields are created for the bound with holdings and the “parent” record with the item that contains the barcode is accessioned at the Annex, Batch Processing staff will receive an email of a report generated by a weekday- scheduled cron job detailing the mismatch of locations between the “parent” and the other holdings with the 876 barcode.
2. Batch Processing staff will use this report to execute a script to flip the holdings with the 876 field to the “parent” MFHD’s location and create item without barcodes (“empty”) with an enumeration of “Bound with" or “Filmed with.” If the 876 field has a subfield 3 with the enumeration of the volume or reel in which that title is contained, then that is appended to the enumeration of the “empty” item record.

Ex. Boundwith:v.4-8

Note: “Empty” items should only be created after the parent holding has been accessioned. Otherwise this causes problems for staff at the Annex.