Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

We have not defined the material for this model so we will do that before we proceed. Double click on Engineering Data. Click on "click here to add a new material" to create a new material. Name the new material "boneBone". Expand Linear Elastic and double click on Isotropic Elasticity.

...

In the properties window, expand Isotropic Elasticity and enter 1e9 Pa for Young's Modulus and 0.3 for Poisson's Ratio.

Image RemovedImage Added

Click on the Project tab, next to the Engineering Data tab, to return to the Project Schematic page.

Image Removed

Assign Material

The default material used for Mechanical is structural. We need to change it to the new material we defined earlier (TissueBone). In the outline window, expand Geometry and highlight Solid Body 1. The bone model will now be highlighted in green, meaning it is being selected. Right below the outline window you will see "Details of Solid Body 1". Expand Material, and change the assignment to Bone. The material properties we defined for Bone will now be assigned to the bone model.

...

In the main window you will see an empty table. Right click on the empty table and click on Add.

Image RemovedImage Added

We will now enter the appropriate information that will help us create a named selection that includes all the faces in the top edge of the model viewed from the XY plane.

...

Click on Generate to generate the named selection. Rename it top y.

Image RemovedImage Added

We will repeat the same steps to create a named selection for all the faces on the bottom edge of the model viewed from the XY plane.

...