...

...

Author: Ben Mullen, Cornell University

Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation

Mesh

Open the Solver

Open the Solver by double clicking under the Steady State Thermal project.

Set the mesh size

When the solver opens, click on in the Outline window to open the Mesh menu in the menu bar. In the Details window, expand Sizing, and change the Element Size from Default to 0.5 m (Make sure the units are set to meters by selecting Units > Metric (m, kg, N, s, V, A) in the menu bar)

Generate the Mesh

When the sizing has been specified, press Mesh > Generate Mesh to create the mesh.

Go to Step 4 - Setup (Physics): Physics Setup

Go to all ANSYS Learning Modules