...
Material Specifications for standard printing at CNF
...
Substrates Specifications:
...
@ 780 nm | Fused Silica Substrates |
---|
...
ITO-Coated Substrates | Silicon Substrates | Borosilicate Substrates | Microscope Slides |
---|
Material | Fused Silica |
|
|
|
|
Sample Holder | DiLL |
|
|
|
|
Refractive index | 1.454 |
|
|
|
|
Dimension | [25, 25, 0.7] mm |
|
|
|
|
Thickness variation | ± 25 µm |
|
|
|
|
Surface finish | DSP |
|
|
|
|
Density | 2.2 g/cm3 |
|
|
|
|
Mohs hardness | 5.3-6.5 |
|
|
|
|
Melting point | 1400°C |
|
|
|
|
Thermal expansion coefficient | 0.54x10-6 K-1 |
|
|
|
|
Heat conductivity | 1.38 W/(m·K) |
|
|
|
|
Compatible w/ Solution Set | 3D SF |
|
|
|
|
Compatible w/ 2PP resin | IP-DIP |
|
|
|
|
Compatible w/ Objective | 63X |
|
|
|
|
Combination & Ref index | -0.058 @ 20°C IP-Dip / -0.025 @ 20°C IP-S |
|
|
|
|
Contrast |
|
|
|
|
|
Cleaning & Prep | O2-plasma & silanization |
|
|
|
|
Indium-Tin Oxide (ITO) Coating Specifications:
ITO | Value |
---|
Film Thickness | 18 nm ± 5 nm |
Film Surface Resistance | 100 - 300 Ω |
Film Transmittance | ≥89% |
Sample Holders available at the CNF
...
Resin available at the CNF
Image Modified
| - IP-DIP: IP-Dip is a liquid negative-tone 2PP resin formulation by NanoScribe designed for printing the finest possible features. IP-Dip is a component of the 3D SF Solution Set. Tall structures exceeding the working distance of the objective can be printed using the DiLL configuration.
- IP-S: IP-S is a highly viscous liquid negative-tone 2PP resin formulation by NanoScribe designed for printing medium-sized features in DiLL. IP-S combines low shrinkage and high stability with a smooth structural surface finish perfect for micro-optics. The photosensitivity is tailored for two-photon polymerization and UV-curing is also possible. As a component of the 3D MF solution set, IP-S is suitable for printing structures with dimensions of several cubic millimeters.
- IP-L 780: IP-L 780 is a liquid negative-tone 2PP resin formulation designed for printing small features in oil immersion configuration. IP-L 780 combines high resolution with low shrinkage and high stability.
- IP-Q: IP-Q is a highly viscous liquid negative-tone 2PP resin formulation by NanoScribe. The 3D LF Microfabrication Solution Set, including IP-Q, extends 2PP 3D printing towards rapid printing of mesoscale structures with millimeter sizes, micrometer precision, and maximum throughput up to the macroscale.
- SU-8: SU-8 is a UV-curable negative-tone 2PP resin by Kayaku Advanced Materials. This resin is well-known and widely used in the lithography community. [The following article applies only to SU-8 100 determined to be the most suitable resin for 2PP as it balances quality and printing speed.]
|
---|
Developer
...