Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Wiki Markup
{center}

h2. Small Solar Oven & Prop Rod Subteam
{center}\\

{center}

h3. Members:  Alex Vargas and Le Li & Trang Pham and Alex Vargas (respectively)
{center}
{center}
This  semester, the small solar oven sub-team set out to build a compact and  lightweight solar box cooker for use in the Ithaca climate.  In addition  to promoting the solar oven project at Cornell, we wanted to promote  the sustainable solar cooking technology in Ithaca, given the resounding  interest in environmentalism throughout the community.  However,  traditional box cookers constructed by the ESW teams have been designed  for nearly vertical incident solar radiation characteristic of tropical  climates, namely Nicaragua - and are not overly mobile.  In order to  have a functional oven available for demonstration at Cornell, we had to  decide on a design with an angled window to accommodate for solar  elevation, as shown below.
{center}

\\
{center} !small cooker.jpg|thumbnail,border=1!\\
{center}

\\
{center}
Figure 1: Completed Small Solar Oven
{center}


{center}
Our  team also addressed the issue of the prop rods used to hold up the lids  on the large ovens were not working very well.  Forces from the wind  would cause the prop rods to break and the hinges attaching the oven  lids to the oven body to become loose.  We decided to address this issue  by designing the adjustable prop rod shown below.  Instead of the old  design with a wooden rod with discreet holes, this design uses a 3/8"  metal pole with a hydraulic fitting and a screw to tighten the rod in  place.  Additionally, a hold was drilled into the flat side of the tee  so that it can be attached to the oven wall.   Though this design has  not yet been tested (we have yet to devise an experimental apparatus),  we are confident that the new prop rod will work better than the  previous design and we plan to use this on new ovens, and retrofit old  ovens with the new design.
{center}
{center} !prop rod 1.JPG|thumbnail,border=1!
{center}
{center}
Figure 2: New Prop Rod Design
{center}\\

h4. For More Information:\\


Small Cooker Final Report


[Prop Rod Final Report|^Report Prop Rod Tests.pdf]