Date: Fri, 29 Mar 2024 08:44:11 -0500 (CDT) Message-ID: <1308532325.4316.1711719851194@cornell1-cos-conf1.managed.contegix.com> Subject: Exported From Confluence MIME-Version: 1.0 Content-Type: multipart/related; boundary="----=_Part_4315_1960110893.1711719851193" ------=_Part_4315_1960110893.1711719851193 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Content-Location: file:///C:/exported.html
Before solving, we need to exit the model creator preprocessor (/P=
REP7
). To do this we will use command FINISH
, which is =
also part of the original file.
FINISH
We can now enter solution module and solve:
/SOL
SOLVE
FINISH
This is equivalent to entering the solution tab in the ANSYS Main Menu a= nd solving the current LS.
At this point, the modified log file should be as follows:
/Title, Orthotropic Plate with a Hole
*SET,a,60e-3=
*SET,r,7e-3
*SET,p,1e6
*SE=
T,E1,59.3e9
*SET,E2,22e9
*SET,G12,8.96e9
*SET,nu21,0.047
/PREP7
ET,1,P=
LANE82
MP,EX,1,E1
MP,EY,1,E2
MP,GXY,1,G12
RECTNG,0,a,0,=
a,
CYL4,0,0,0,0,r,90
ASBA,1,2
LESIZE,9,,,50,0.25,,,,0
LESIZE,5,,,40,,,,,,0
SMRT,1
MSHAPE,=
0,2D
MSHKEY,0
AMESH,3
DL,8,=
3,SYMM
DL,9,3,SYMM
SFL,2,PRES,-p,
FINISH
/SOL
SOLVE
FI=
NISH
Let's verify that a solution is generated with the list of commands we h= ave created so far. Again, restart ANSYS or go to Utility Menu > File &g= t; Clear & Start New and select Do not read file.
Copy the list of commands we have generated so far and paste them in the= ANSYS Command Input window. ANSYS performs the solution and a yellow windo= w should pop up saying "Solution is done!".