/ Journal File for GAMBIT 2.4.6, Database 2.4.4, ntx86 SP2007051421
/ Identifier "Clean Script"
/ File opened for write Wed Oct 08 09:16:13 2008.
undo begingroup

/clearance height
$ch = 0.1

/flocculator height: various heights
$fh = 0.5

/create baffle spacing
$bs1 = 0.1
$bs2 = 0.1
$bs3 = 0.1
$bs4 = 0.1
$bs5 = 0.1
$bs6 = 0.1

/create x-coordinate
$w0 = 0 		
$b1 = $w0+$bs1		
$b2 = $b1+$bs2
$b3 = $b2+$bs3
$b4 = $b3+$bs4
$b5 = $b4+$bs5		
$w6 = $b5+$bs6		

/create y-coordinate
$y1 = $ch 
$y2 = $fh-$ch 

coordinate modify "c_sys.1" xyplane xaxis add 0 AND 0.1 reset snap lines
coordinate modify "c_sys.1" xyplane yaxis add 0 AND 0.1 reset snap lines
window modify coordinates "c_sys.1" xyplane grid
undo endgroup
undo begingroup
coordinate modify "c_sys.1" xyplane xaxis add 0 AND 0.1 reset snap lines
coordinate modify "c_sys.1" xyplane yaxis reset snap lines
window modify coordinates "c_sys.1" xyplane grid
undo endgroup
undo begingroup
coordinate modify "c_sys.1" xyplane xaxis add 0 AND 0.1 AND 0.2 AND 0.3 AND \
  0.4 AND 0.5 AND 0.6 reset snap lines
coordinate modify "c_sys.1" xyplane yaxis reset snap lines
window modify coordinates "c_sys.1" xyplane grid
undo endgroup
undo begingroup
coordinate modify "c_sys.1" xyplane xaxis add 0 AND 0.1 AND 0.2 AND 0.3 AND \
  0.4 AND 0.5 AND 0.6 reset snap lines
coordinate modify "c_sys.1" xyplane yaxis add 0 AND 0.1 AND 0.2 AND 0.3 reset \
  snap lines
window modify coordinates "c_sys.1" xyplane grid
undo endgroup
vertex create coordinates 0 0 0
vertex create coordinates 0 $y1 0
vertex create coordinates 0 $y2 0
vertex create coordinates 0 $fh 0
vertex create coordinates $b1 0 0
vertex create coordinates $b1 $y1 0
vertex create coordinates $b1 $y2 0
vertex create coordinates $b1 $fh 0
vertex create coordinates $b2 0 0
vertex create coordinates $b2 $y1 0
vertex create coordinates $b2 $y2 0
vertex create coordinates $b2 $fh 0
vertex create coordinates $b3 0 0
vertex create coordinates $b3 $y1 0
vertex create coordinates $b3 $y2 0
vertex create coordinates $b3 $fh 0
vertex create coordinates $b4 0 0
vertex create coordinates $b4 $y1 0
vertex create coordinates $b4 $y2 0
vertex create coordinates $b4 $fh 0
vertex create coordinates $b5 0 0
vertex create coordinates $b5 $y1 0
vertex create coordinates $b5 $y2 0
vertex create coordinates $b5 $fh 0
vertex create coordinates $w6 0 0
vertex create coordinates $w6 $y1 0
vertex create coordinates $w6 $y2 0
vertex create coordinates $w6 $fh 0

edge create straight "vertex.1" "vertex.2" "vertex.3" "vertex.4"
edge create straight "vertex.5" "vertex.6" "vertex.7" "vertex.8"
edge create straight "vertex.9" "vertex.10" "vertex.11" "vertex.12"
edge create straight "vertex.13" "vertex.14" "vertex.15" "vertex.16"
edge create straight "vertex.17" "vertex.18" "vertex.19" "vertex.20"
edge create straight "vertex.21" "vertex.22" "vertex.23" "vertex.24"
edge create straight "vertex.25" "vertex.26" "vertex.27" "vertex.28"
edge create straight "vertex.4" "vertex.8" "vertex.12" "vertex.16" \
  "vertex.20" "vertex.24" "vertex.28"
edge create straight "vertex.3" "vertex.7" "vertex.11" "vertex.15" \
  "vertex.19" "vertex.23" "vertex.27"
edge create straight "vertex.2" "vertex.6" "vertex.10" "vertex.14" \
  "vertex.18" "vertex.22" "vertex.26"
edge create straight "vertex.1" "vertex.5" "vertex.9" "vertex.13" "vertex.17" \
  "vertex.21" "vertex.25"
/ERROR occurred in the next command!
face create wireframe "edge.1" "edge.2" "edge.3" "edge.4" "edge.5" "edge.6" \
  "edge.7" "edge.8" "edge.9" "edge.10" "edge.11" "edge.12" "edge.13" \
  "edge.14" "edge.15" "edge.16" "edge.17" "edge.18" "edge.19" "edge.20" \
  "edge.21" "edge.22" "edge.23" "edge.24" "edge.25" "edge.26" "edge.27" \
  "edge.28" "edge.29" "edge.30" "edge.31" "edge.32" "edge.33" "edge.34" \
  "edge.35" "edge.36" "edge.37" "edge.38" "edge.39" "edge.40" "edge.41" \
  "edge.42" "edge.43" "edge.44" "edge.45" real
face create wireframe "edge.3" "edge.22" "edge.6" "edge.28" real
face create wireframe "edge.2" "edge.5" "edge.34" "edge.28" real
face create wireframe "edge.1" "edge.34" "edge.4" "edge.40" real
undo begingroup
coordinate modify "c_sys.1" xyplane xaxis add 0 AND 0.1 AND 0.2 AND 0.3 AND \
  0.4 AND 0.5 AND 0.6 reset snap lines
coordinate modify "c_sys.1" xyplane yaxis add 0 AND 0.1 AND 0.2 AND 0.3 reset \
  snap lines
window modify coordinates "c_sys.1" xyplane nogrid
undo endgroup
face create wireframe "edge.23" "edge.9" "edge.29" "edge.6" real
face create wireframe "edge.29" "edge.8" "edge.35" "edge.5" real
face create wireframe "edge.35" "edge.7" "edge.41" "edge.4" real
face create wireframe "edge.24" "edge.12" "edge.30" "edge.9" real
face create wireframe "edge.30" "edge.11" "edge.36" "edge.8" real
face create wireframe "edge.36" "edge.10" "edge.42" "edge.7" real
face create wireframe "edge.25" "edge.15" "edge.31" "edge.12" real
face create wireframe "edge.31" "edge.14" "edge.37" "edge.11" real
face create wireframe "edge.37" "edge.13" "edge.43" "edge.10" real
face create wireframe "edge.26" "edge.18" "edge.32" "edge.15" real
face create wireframe "edge.32" "edge.17" "edge.38" "edge.14" real
face create wireframe "edge.38" "edge.16" "edge.44" "edge.13" real
face create wireframe "edge.27" "edge.21" "edge.33" "edge.18" real
face create wireframe "edge.33" "edge.20" "edge.39" "edge.17" real
face create wireframe "edge.39" "edge.19" "edge.45" "edge.16" real
undo begingroup
blayer create first 0.001 growth 1.4 total 0.00436 rows 3 transition 1 \
  trows 0 uniform
blayer attach "b_layer.1" face "face.2" "face.1" "face.3" "face.1" "face.1" \
  "face.4" "face.2" "face.5" "face.3" "face.6" "face.3" "face.4" "face.4" \
  "face.7" "face.5" "face.8" "face.6" "face.9" "face.6" "face.7" "face.7" \
  "face.10" "face.8" "face.11" "face.9" "face.12" "face.9" "face.10" \
  "face.10" "face.13" "face.11" "face.14" "face.12" "face.15" "face.12" \
  "face.13" "face.13" "face.16" "face.14" "face.17" "face.15" "face.18" \
  "face.15" "face.16" "face.16" "face.17" "face.18" "face.18" edge "edge.2" \
  "edge.3" "edge.1" "edge.22" "edge.6" "edge.6" "edge.5" "edge.5" "edge.4" \
  "edge.4" "edge.40" "edge.23" "edge.9" "edge.9" "edge.8" "edge.8" "edge.7" \
  "edge.7" "edge.41" "edge.24" "edge.12" "edge.12" "edge.11" "edge.11" \
  "edge.10" "edge.10" "edge.42" "edge.25" "edge.15" "edge.15" "edge.14" \
  "edge.14" "edge.13" "edge.13" "edge.43" "edge.26" "edge.18" "edge.18" \
  "edge.17" "edge.17" "edge.16" "edge.16" "edge.44" "edge.27" "edge.21" \
  "edge.20" "edge.19" "edge.45" add
undo endgroup
undo begingroup
edge picklink "edge.45" "edge.44" "edge.43" "edge.42" "edge.41" "edge.40" \
  "edge.39" "edge.38" "edge.37" "edge.36" "edge.35" "edge.34" "edge.33" \
  "edge.32" "edge.31" "edge.30" "edge.29" "edge.28" "edge.27" "edge.26" \
  "edge.25" "edge.24" "edge.23" "edge.22" "edge.21" "edge.20" "edge.19" \
  "edge.18" "edge.17" "edge.16" "edge.15" "edge.14" "edge.13" "edge.12" \
  "edge.11" "edge.10" "edge.9" "edge.8" "edge.7" "edge.6" "edge.5" "edge.4" \
  "edge.3" "edge.2" "edge.1"
edge mesh "edge.1" "edge.2" "edge.3" "edge.4" "edge.5" "edge.6" "edge.7" \
  "edge.8" "edge.9" "edge.10" "edge.11" "edge.12" "edge.13" "edge.14" \
  "edge.15" "edge.16" "edge.17" "edge.18" "edge.19" "edge.20" "edge.21" \
  "edge.22" "edge.23" "edge.24" "edge.25" "edge.26" "edge.27" "edge.28" \
  "edge.29" "edge.30" "edge.31" "edge.32" "edge.33" "edge.34" "edge.35" \
  "edge.36" "edge.37" "edge.38" "edge.39" "edge.40" "edge.41" "edge.42" \
  "edge.43" "edge.44" "edge.45" successive ratio1 1 size 0.002
undo endgroup
face mesh "face.1" "face.2" "face.3" "face.4" "face.5" "face.6" "face.7" \
  "face.8" "face.9" "face.10" "face.11" "face.12" "face.13" "face.14" \
  "face.15" "face.16" "face.17" "face.18" map size 1
/ File opened for append Wed Oct 08 11:58:25 2008.
physics create "w0" btype "WALL" edge "edge.1" "edge.2" "edge.3"
physics create "b1" btype "WALL" edge "edge.5" "edge.4"
physics create "b2" btype "WALL" edge "edge.9" "edge.8"
physics create "b3" btype "WALL" edge "edge.10" "edge.11"
physics create "b4" btype "WALL" edge "edge.15" "edge.14"
physics create "b5" btype "WALL" edge "edge.17" "edge.16"
physics create "w6" btype "WALL" edge "edge.21" "edge.20" "edge.19"
physics create "top" btype "WALL" edge "edge.22" "edge.23" "edge.24" \
  "edge.25" "edge.26" "edge.27"
physics create "bottom" btype "WALL" edge "edge.41" "edge.42" "edge.43" \
  "edge.44"
physics create "Inlet" btype "VELOCITY_INLET" edge "edge.40"
physics create "Outlet" btype "PRESSURE_OUTLET" edge "edge.45"