This page has been moved to https://courses.ansys.com/index.php/courses/thermal-stresses-in-a-bar/
Click in the link above if you are not automatically redirected in 10 seconds.

Thermal Stresses in a Bar

Created using ANSYS 13.0

Problem Specification

A steel bar (E = 2.0E10 Pa, ν = 0.3, α = 1.2E-5) with the dimensions shown below is placed between two walls. On one side, the bar is rigidly fixed to the wall and on the other, there is a 2 mm gap between the wall and the bar. What is the stress in the bar after the temperature increases

Unable to find DVI conversion log file.

?




Go to Step 1: Pre-Analysis & Start-Up

Go to all ANSYS Learning Modules

  • No labels